ANTI-HUMIDITY, waterborne paint that creates a highly resistant barrier against rising damp on both interior or exterior walls. It is ideal for homes, basements, cellars, garages and it can also be coated with other paints, waterborne enamels or decorative finishes.
Walls in bricks or stone, cured rendered walls that can be slightly damp but should not be leaking water.
The walls should be solid, clean and free from dust or grease. Remove any degraded or inconsistent parts on the surface to be treated.
By brush or roller, carefully filling all possible cavities. Apply 2 or 3 coats of product according to the condition of the wall and the barrier effect desired to be obtained. The product can be moderately colored.
Brush or roller – Ready to use, or with max. 5% water.
(per coat): 1-2 m²/ℓ
Antimold, anticondensation and thermal insulating paint
Antimold paint for domestic interiors that can resolve the disturbing problem of mold growth. It is waterborne with a low VOC, is not harmful to health and is simple and quick to apply. It also has excellent whiteness, good hide and high vapor permeability. The thermal insulating characteristics of THERMO CONTROL will avoid condensation and limit the formation of unpleasant molds.
Internal rendered surfaces based on cement, concrete or Gypsum.
For the direct application of THERMOCONTROL, the surface to paint must be clean, dry and uniform. Clean away areas contaminated by mold with SANIFLEX sanitizing treatment. In case of old, unsound wall, remove any loose parts and prime with ADIFIX ANTIMUFFA.
By brush or roller.
With 15-20% water.
(per coat): about 8 – 9 m²/ℓ
Top San TR
Emulsion paint for interiors, resistant to molds
Emulsion paint for interior use with lasting protection to mould and mildew growth. It has high breathing characteristics, good hide and extra whiteness. Ideal for kitchens and bathrooms and walls with existing or that are subject to mould growth.
Any interior wall in humid environment, such as kitchens, bathrooms, basements, laundries.
After effecting appropriate treatment with SANIFLEX sanitizing wash, proceed as for a normal emulsion paint. Surfaces to treat must be sound, dry, clean, even and free from any loose friable material. For all new walls or in presence of chalking, a priming coat of ADIFIX is recommended.
A special algicide and fungicide additive in paste form that can be added to any interior or exterior paint to provide an added protection against the formation of mould growth on the applied paint film.The active substances used ensure a durable preservative action to the paint similar to specific ready-made products.
May be added as an antimould protection to any paint, coating, putty or adhesive product.
Pour the EASY STOP into the paint product in the given dosage and stir thoroughly. Proceed with the recommended thinning according to the instruction of the product itself. In order to achieve the highest antimould effect, it is advisable to prepare the surface with SANIFLEX sanitizing wash (refer to relative TDS).
Ready to use.
Waterborne concentrated sanitizing ant-mould primer
Waterborne concentrated sanitizing antimould primer Adifix Antimuffa is a specialized product for the treatment of interior or exterior Gypsum or plastered walls. With a single application it enables you to equalize and consolidate the substrate in addition to gaining a valid bactericidal protection and sanitizing effect.
Any normal wall surface which shows signs of mould growth or to prevent reforming.
Apply SANIFLEX directly to the wall to treat. Allow the product to act on the surface for at least 12 hours before cleaning away with a dry cloth insisting on the areas more seriously affected. Ideal paint to finish is TOP SAN.
Chiudendo questo banner acconsenti all’uso dei cookie.OkLeggi di più