Glitter
Glitter powder for interiors, in different types and colors, to add to the clear finish AMIRÈ LIGHT and other Adicolor decorative products, to give a bright and sparkling effect to your finishes.
Features
Intended use
Consult see what is indicated for decorative products in which it is expected the addition of GLITTER.
Preparing the required color
Available in 8 variants.
Application
Add 30g max. of GLITTER powder for each 750ml of AMIRÉ LIGHT or to other Adicolor decoratives
Metaltop KS
Special GOLD paste studied to attain beautiful gold effects when added to the last coat of VENEXIAN FAUX, MIZAAR or MARMORINO. If it is mixed 1:1 with DAMASCHI Transparent, it becomes a splendid, premium quality, waterborne enamel finishing.
Features
Intended use
Additive for stucco finishes and special enamel effects.
Application
Add 1 ℓ of METALTOP KS GOLD to every each 4 ℓ in the final coat of our stucco finishes: VENEXIAN FAUX, MIZAAR or MARMORINO. METALTOP KS can also be used mixed 1:1 with DAMASCHI Transparent, to create splendid gold enamel effect finishes.
Universal Tinter
Pre-dosed colorants specifically designed for coloring all the Adicolor decorative finishes. Available also in Gold or Silver version, tudied to create the specific bases of Athelié. It can also be used with other Adicolor decorative finishes.
Features
Intended use
For coloring all the Adicolor decorative finishes.
Preparation of the color
Available in 48 pre-dosed colors + Gold and Silver.
Application
Add the specified quantity of the chosen Adicolor TINTER to the product as indicated on the relative color chart and stir delicately until well blended.
Easywax
Water based whitened wax for interior use with non-yellowing and water repelling properties, ideal to protect polished plasters and stuccos.
Features
Intended use
Protective waterborne wax for interiors.
Application
Apply a coat of Easywax with a clean sponge or a non-fluffy cloth. As soon as the product starts to wither, before it dries, buff and polish the surface well.
Thinning
Ready to use.
Spread rate
(per coat): 15 – 20 m²/ℓ
Drying time
30 to 40 minutes, touch dry.
Specific gravity
1630 ± 20 g/ℓ
Adilux
Waterborne glazing top coat for interior or exterior use. Ideal to give a non-yellowing, gloss effect and extra protection to decorative finishes, paints and coatings.
Features
Intended use
As a protective, glazing top coat, gloss effect for interior end exterior.
Surface treatment
Surfaces to treat must be perfectly dry and clean.
Application
Brush, roller or by spray.
Thinning
Ready to use.
Spread rate
(per coat): 10 to 12 m²/ℓ
Drying time
2 – 3 hours, touch dry.
Specific gravity
1050 ±20 g/ℓ
Satinlux
A hard wearing, waterborne, clear glazing top coat for interior or exterior use. Ideal to give a non-yellowing, satin effect and extra protection to Sogni Line decorative finishes, and other paints and coatings used in high traffic areas, without altering the original product appearance.
Features
Intended use
As a protective, glazing top coat, satin effect for interior end exterior.
Surface treatment
Surfaces to treat must be perfectly dry and clean.
Application
Brush, roller or by spray.
Thinning
Ready to use.
Spread rate
10 to 12 m²/ℓ
Drying time
1 – 2 h, dust fre;e 2 – 3 h, touch dry.
Specific gravity
1010 ±20 g/ℓ
Fondo Universale
Pigmented, gripping base coat specially formulated for the application of the Sogni Line decorative finishes. This base coat is designed to guarantee the ideal results with maximum durability.
Features
Intended use
For interiors and exteriors on rendered walls.
Surface treatment
Ensure that the surface is clean, dry and free from peeling paint or any substance that may compromise adhesion. In case of old and powdery walls or in presence of weak paint, apply a coat of ADIFIX primer thinned as specified.
Application
Using a short-pile roller, apply one or two base coats of FONDO UNIVERSALE thinned with 20-30% of water and let dry for minimum 5-6 hours before applying the finish.
Thinning
With 20 to 30% water.
Spread rate
(per coat): 8 to 10 m²/ℓ.
Drying time
30 to 40 minutes, touch dry.
Specific gravity
1630 ± 20 g/ℓ
Adifix
Waterborne, concentrated, sealing primer that forms an alkaliresistant, insulating film, improving the adhesion and the resistance of the finishing coat.
Features
Intended use
Surface preparation of new walls in concrete, masonry, cement, lime or gypsum plasters or where old paints are not sufficiently sound.
Surface treatment
Surface to treat must be clean, dry and even. Where necessary effect repairs on cracks or voids and if needed level the surface.
Application
Brush or roller.
Thinning
Add 5 or 6 parts of water to 1 part of ADIFIX.
Spread rate
About 40 – 50 m²/ℓ
Drying time
1 hour, touch dry.
Specific gravity
1000 ± 20 g/ℓ
Desiré Brush
Desiré Brush.
Sandé Brush
Sandè Brush.
Special glove for Velé
Special glove for Velé.
Chamois cloth
Chamois cloth to make rag-stippler.
Stippling pad
Stippling pad wooden structure.
Natural sponge
Natural sea sponge.
Plastic distender
Plastic distender.
Stainless distender
Stainless distender.
Sogni SK spatula
Sogni SK plasic spatula.
Veli&Velluti trowel
Veli&Velluti trowel.
Stainless steel trowel
Stainless steel rounded trowel.
Woodream tool
Woodream tool.
Drussì/Sutaj tool
Drussì/Sutaj tool.
Reptiles roller
Reptiles roller.
Tessuti Tool
Tessuti Adicolor Tool.
Sogni Line Panels
Applied display panel. Framed display panels with true applications of the “Sogni Line” decorative effect finishes.
Sogni Line Display
Applied display panel. Display panels for walls at point-of-sale with color collection in true applications.
