Metallic, sandy effect, decorative paint
A bold and rich, sandy effect, waterborne, metallic paint of great charm and elegance that combines interesting smooth and other finely textured areas, creating settings of unique contrasts and reflections. The finish has good hide and is available in 3 bases: gold, silver and aluminum.
Features
Intended use
Interiors. Cement based surfaces, gypsum and plasterboard. Walls
Surface treatment
New unpainted surfaces: Clean the surface and remove all possible traces of dust or dirt. Treat the substrate with
a priming coat of ADIFIX thinned as specified and allow to dry. Proceed with the application of a basecoat using
FONDO UNIVERSALE thinned in the recommended doses and colored in a tone similar to that of the finish.
Previously painted surfaces: Check that the state of the existing paintwork is in excellent condition, if so, proceed
directly with the application of the FONDO UNIVERSALE, as described in the previous paragraph.
If the surface shows signs of defects, such as peeling or chalking, remove any loose parts that would compromise
the correct adhesion of the product then proceed as indicated hereabove for New unpainted surfaces.
Preparing the required color
The chosen color is obtained by adding the specified quantity of Adicolor TINTER to the product base according to the formula indicated on the color chart. The product can also be colored with the Adicolor tinting system.
Application
Once the basecoat is well dry, proceed with the application of SHADÉ S by brush.
Choose whether to apply the product proceeding with brush strokes always in the same direction to obtain a
“striated” effect finish, or to apply the product with random spots, a little distant from each other, then joining the
spots together to obtain a “islands” effect finish.
One coat is generally sufficient to achieve a finish with good hide.
Thinning
Shadé S: ready to use
Shadé L: ready to use (with max. 12% water for spray applications)
Spread rate per coat
Shadé S = 6-8 m²/ℓ
Shadé L = 10-12 m²/ℓ
Drying time
at 20°C: 4-6 hours minimum
Specific gravity
Shadé S: AR 1100; OR 1150; AL 1080 ± 20 g/ℓ
Shadé L: AR 1240; OR 1140; AL 1070 ± 20 g/ℓ
Viscosity
Shadé S: 14000 – 15000 mPa·s (Brookfield at 27°C)
Shadé L: 5000 – 6000 mPa·s (Brookfield at 22°C)
Video
Shadé S ENG new
Shadé S Effetto Diagonale ENG new
Shadé S Effetto Infinito ENG new
Shadé S Effetto Verticale ENG new
